Our regulators screw right onto the front of the Torch Booster and make it easy to set torch pressure between 1-15 psi; standard Torch Booster pressure is 25 psi.

Many jewelers’ torches work best at 3-7 psi, depending on torch manufacturer and tip size, and our regulator lets you set pressure exactly right for your torch.

OSHA and local fire codes require a flashback arrestor on torches mixing natural gas and oxygen. Our regulator mount combination flashback arrestor check valves fit right on the regulator to protect your gas meter from the dangers of a torch flashback.

G-TEC Distributors sell regulators and flashback arrestor equipment from different manufacturers. G-TEC takes no responsibility for performance or suitability of these products.

The TB-15 Torch Booster is the right torch booster for a jeweler using 1, 2 or 3 bench torches and who does not do any casting. The system supplies 15 cubic feet of natural gas per hour at 25 psi. Many TB-15 users also purchase a regulator to set gas pressure between 3-7 psi, depending on torch type.

The system includes a 1/2” shutoff valve and 5’ flexible hose for easy connection to the utility natural gas pipe. On the high-pressure output side a “B” adapter for directly connecting a hose is included as well as a female CGA 510 fitting to allow a BBQ propane tank style regulator to be connected.

One-year parts and labor warranty. Click here to read G-TEC’s warranty. Click here to read sales terms and conditions.

Shipping from Buffalo, NY is an additional charge. Sales tax is charged for deliveries in New York State.

This system cannot be purchased for installation in New York City - click here for TB-15 Torch Boosters for New York City.

1-800-243-4466

www.gesswein.com

(212) 944-4944

1-800-545-6566

1-800-772-3456

TB-125 Torch Boosters are for the mid-sized jewelry manufacturer with up to 25 bench torches and/or a single large casting torch, such as a Harris Melting Torch with 30N tip.

The TB-125 system supplies 125 cubic feet of natural gas per hour at 25 psi. Many TB-125 users also purchase a regulator to set gas pressure between 3-7 psi, depending on torch type.

The system includes a 3/4” shutoff valve and 5’ flexible hose for easy connection to the utility natural gas pipe. On the high-pressure output side a “B” adapter for directly connecting a hose is included as well as a female CGA 510 fitting to allow a BBQ propane tank style regulator to be connected.

One-year/2,000 hour parts and labor warranty. Click here to read G-TEC’s warranty. Click here to read sales terms and conditions.

Shipping from Buffalo, NY is an additional charge. Sales tax is charged for deliveries in New York State.

This system cannot be purchased for installation in New York City - click here for TB-125 Torch Boosters for New York City.

TB-250 Torch Boosters are for large jewelry manufacturers with up to 40 bench torches and/or two large casting torches, such as a Harris Melting Torch with 30N tip.

 The TB-250 system supplies 250 cubic feet of natural gas per hour at 45 psi. Many TB-250 users also purchase a regulator to set gas pressure between 3-7 psi, depending on torch type.

The system includes a 3/4” shutoff valve for use at the point of connection with the utility gas pipe.

One-year/2,000 hour parts and labor warranty. Click here to read G-TEC’s warranty. Click here to read sales terms and conditions.

Shipping from Buffalo, NY is an additional charge. Sales tax is charged for deliveries in New York State.

This system cannot be purchased for installation in New York City - click here for TB-250 Torch Boosters for New York City.

TB-500 Torch Boosters are for large jewelry manufacturers with up to 75 bench torches and/or three large casting torches, such as a Harris Melting Torch with 30N tip.

  The TB-500 system supplies 500 cubic feet of natural gas per hour at 45 psi. Many TB-500 users also purchase a regulator to set gas pressure between 3-7 psi, depending on torch type.

The system includes a 3/4” shutoff valve for use at the point of connection with the utility gas pipe.

One-year/2,000 hour parts and labor warranty. Click here to read G-TEC’s warranty. Click here to read sales terms and conditions.

Shipping from Buffalo, NY is an additional charge. Sales tax is charged for deliveries in New York State.

This system cannot be purchased for installation in New York City - click here for TB-500 Torch Boosters for New York City.

Return To The Top Of This Page / Return To The Home Page

You can buy your Torch Booster from the industry’s leading distributors, or if you do not have an account with them you can buy directly from G-TEC. Either way the price for the Torch Booster is the same.

Click here if you are purchasing a Torch Booster to be installed in New York City - prices and equipment are different.

Click to buy a

TB-15

Torch Booster

Click to buy a

TB-30

Torch Booster

Click to buy a

TB-60

Torch Booster

Click to buy a

TB-125

Torch Booster

Click to buy a

TB-250

Torch Booster

Click to buy a

TB-500

Torch Booster

Learn about

G-TEC Torch Boosters

for every jewelry shop

Torch Boosters are

Easy To Install

in your shop

Torch Boosters are

Approved

across the US and Canada

Learn about the

Advantages of Hi Pressure

natural gas for jewelry manufacturing

Please

Contact G-TEC

with questions

Torches sold separately.

A 5’ flexible hose with a shutoff valve connects the Torch Booster to your utility natural gas pipe.

A “B” fitting adapter lets you connect your torch hose directly to the torch booster to use natural gas at 25 psi.

Be sure to install a “Torch Mount” flashback arrestor check valve on your torch .

If you already own a regulator with a CGA 510 fitting (the kind that  fits on a BBQ propane tank) then you can reuse that regulator with your Torch Booster. An adapter fitting is included with the system.

Our regulators screw right onto the front of the Torch Booster and make it easy to set torch pressure between 1-15 psi; standard Torch Booster pressure is 25 psi.

Many jewelers’ torches work best at 3-7 psi, depending on torch manufacturer and tip size, and our regulator lets you set pressure exactly right for your torch.

OSHA and local fire codes require a flashback arrestor on torches mixing natural gas and oxygen. Our regulator mount combination flashback arrestor check valves fit right on the regulator to protect your gas meter from the dangers of a torch flashback.

G-TEC Distributors sell regulators and flashback arrestor equipment from different manufacturers. G-TEC takes no responsibility for performance or suitability of these products.

Use your Discover, VISA, MasterCard or American Express card to purchase your TB-15 Torch Booster.

New York State sales tax for units sold for delivery in New York and shipping are an additional cost.

The TB-30 Torch Booster is the right torch booster for a jeweler using up to 6 bench torches or who does occasional casting. The system supplies 30 cubic feet of natural gas per hour at 25 psi. Many TB-30 users also purchase a regulator to set gas pressure between 3-7 psi, depending on torch type.

The system includes a 1/2” shutoff valve and 5’ flexible hose for easy connection to the utility natural gas pipe. On the high-pressure output side a “B” adapter for directly connecting a hose is included as well as a female CGA 510 fitting to allow a BBQ propane tank style regulator to be connected.

One-year parts and labor warranty. Click here to read G-TEC’s warranty. Click here to read sales terms and conditions.

Shipping from Buffalo, NY is an additional charge. Sales tax is charged for deliveries in New York State.

This system cannot be purchased for installation in New York City - click here for TB-30 Torch Boosters for New York City.

A 5’ flexible hose with a shutoff valve connects the Torch Booster to your utility natural gas pipe.

A “B” fitting adapter lets you connect your torch hose directly to the torch booster to use natural gas at 25 psi.

Be sure to install a “Torch Mount” flashback arrestor check valve on your torch .

If you already own a regulator with a CGA 510 fitting (the kind that  fits on a BBQ propane tank) then you can reuse that regulator with your Torch Booster. An adapter fitting is included with the system.

Our regulators screw right onto the front of the Torch Booster and make it easy to set torch pressure between 1-15 psi; standard Torch Booster pressure is 25 psi.

Many jewelers’ torches work best at 3-7 psi, depending on torch manufacturer and tip size, and our regulator lets you set pressure exactly right for your torch.

OSHA and local fire codes require a flashback arrestor on torches mixing natural gas and oxygen. Our regulator mount combination flashback arrestor check valves fit right on the regulator to protect your gas meter from the dangers of a torch flashback.

G-TEC Distributors sell regulators and flashback arrestor equipment from different manufacturers. G-TEC takes no responsibility for performance or suitability of these products.

Use your Discover, VISA, MasterCard or American Express card to purchase your TB-30 Torch Booster.

New York State sales tax for units for for delivery in New York and shipping are an additional cost.

Torch sold separately.

A 5’ flexible hose with a shutoff valve connects the Torch Booster to your utility natural gas pipe.

A “B” fitting adapter lets you connect your torch hose directly to the torch booster to use natural gas at 25 psi.

Be sure to install a “Torch Mount” flashback arrestor check valve on your torch .

If you already own a regulator with a CGA 510 fitting (the kind that  fits on a BBQ propane tank) then you can reuse that regulator with your Torch Booster. An adapter fitting is included with the system.

Use your Discover, VISA, MasterCard or American Express card to purchase your TB-60 Torch Booster.

New York State sales tax for units sold fro delivery in New York and shipping are an additional cost.

The TB-60 Torch Booster is the right torch booster for a jeweler using up to 12 bench torches or who does frequent casting with a smaller torch. Jewelers using a large casting torch such as a Harris 30N tip should purchase the TB-125 Torch Booster. The TB-60 system supplies 60 cubic feet of natural gas per hour at 25 psi. Many TB-60 users also purchase a regulator to set gas pressure between 3-7 psi, depending on torch type.

The system includes a 1/2” shutoff valve and 5’ flexible hose for easy connection to the utility natural gas pipe. On the high-pressure output side a “B” adapter for directly connecting a hose is included as well as a female CGA 510 fitting to allow a BBQ propane tank style regulator to be connected.

One-year/2,000 hour parts and labor warranty. Click here to read the G-TEC warranty. Click here to read sales terms and conditions.

Shipping from Buffalo, NY is an additional charge. Sales tax is charged for deliveries in New York State.

This system cannot be purchased for installation in New York City - click here for TB-60 Torch Boosters for New York City.

A 5’ flexible hose  with a shutoff valve connects the Torch Booster to your utility natural gas pipe.

A “B” fitting adapter lets you connect your torch hose directly to the torch booster to use natural gas at 25 psi.

Be sure to install a “Torch Mount” flashback arrestor check valve on your torch .

If you already own a regulator with a CGA 510 fitting (the kind that  fits on a BBQ propane tank) then you can reuse that regulator with your Torch Booster. An adapter fitting is included with the system.

Use your Discover, VISA, MasterCard or American Express card to purchase your TB-125 Torch Booster.

New York State sales tax for units sold for delivery in New York and shipping are an additional cost.

Use your Discover, VISA, MasterCard or American Express card to purchase your TB-250 Torch Booster.

New York State sales tax for units sold for delivery in New York and shipping are an additional cost.

Use your Discover, VISA, MasterCard or American Express card to purchase your TB-500 Torch Booster.

New York State sales tax for units sold for delivery in New York and shipping are an additional cost.

Return To The Top Of This Page / Return To The Home Page

Return To The Top Of This Page / Return To The Home Page

Return To The Top Of This Page / Return To The Home Page

Return To The Top Of This Page / Return To The Home Page

Return To The Top Of This Page / Return To The Home Page

Learn about

G-TEC Torch Boosters

for every jewelry shop

Torch Boosters are

Easy To Install

in your shop

Torch Boosters are

Approved

across the US and Canada

Learn about the

Advantages of Hi Pressure

natural gas for jewelry manufacturing

Please

Contact G-TEC

with questions

Learn about

G-TEC Torch Boosters

for every jewelry shop

Torch Boosters are

Easy To Install

in your shop

Torch Boosters are

Approved

across the US and Canada

Learn about the

Advantages of Hi Pressure

natural gas for jewelry manufacturing

Please

Contact G-TEC

with questions

Learn about

G-TEC Torch Boosters

for every jewelry shop

Torch Boosters are

Easy To Install

in your shop

Torch Boosters are

Approved

across the US and Canada

Learn about the

Advantages of Hi Pressure

natural gas for jewelry manufacturing

Please

Contact G-TEC

with questions

Learn about

G-TEC Torch Boosters

for every jewelry shop

Torch Boosters are

Easy To Install

in your shop

Torch Boosters are

Approved

across the US and Canada

Learn about the

Advantages of Hi Pressure

natural gas for jewelry manufacturing

Please

Contact G-TEC

with questions

Learn about

G-TEC Torch Boosters

for every jewelry shop

Torch Boosters are

Easy To Install

in your shop

Torch Boosters are

Approved

across the US and Canada

Learn about the

Advantages of Hi Pressure

natural gas for jewelry manufacturing

Please

Contact G-TEC

with questions

Learn about

G-TEC Torch Boosters

for every jewelry shop

Torch Boosters are

Easy To Install

in your shop

Torch Boosters are

Approved

across the US and Canada

Learn about the

Advantages of Hi Pressure

natural gas for jewelry manufacturing

Please

Contact G-TEC

with questions

1-800-877-7777

Indian Jewelers Supply

1-800-545-6540

1-800-243-4466

www.gesswein.com

(212) 944-4944

1-800-545-6566

1-800-772-3456

1-800-877-7777

Indian Jewelers Supply

1-800-545-6540

1-800-243-4466

www.gesswein.com

(212) 944-4944

1-800-545-6566

1-800-772-3456

1-800-877-7777

Indian Jewelers Supply

1-800-545-6540

1-800-243-4466

www.gesswein.com

(212) 944-4944

1-800-545-6566

1-800-772-3456

1-800-877-7777

Indian Jewelers Supply

1-800-545-6540

1-800-243-4466

www.gesswein.com

(212) 944-4944

1-800-545-6566

1-800-772-3456

1-800-877-7777

Indian Jewelers Supply

1-800-545-6540

1-800-243-4466

www.gesswein.com

(212) 944-4944

1-800-545-6566

1-800-772-3456

1-800-877-7777

Indian Jewelers Supply

1-800-545-6540

Our regulators screw right onto the front of the Torch Booster and make it easy to set torch pressure between 1-15 psi; standard Torch Booster pressure is 25 psi.

Many jewelers’ torches work best at 3-7 psi, depending on torch manufacturer and tip size, and our regulator lets you set pressure exactly right for your torch.

OSHA and local fire codes require a flashback arrestor on torches mixing natural gas and oxygen. Our regulator mount combination flashback arrestor check valves fit right on the regulator to protect your gas meter from the dangers of a torch flashback.

G-TEC Distributors sell regulators and flashback arrestor equipment from different manufacturers. G-TEC takes no responsibility for performance or suitability of these products.

Our regulators screw right onto the front of the Torch Booster and make it easy to set torch pressure between 1-15 psi; standard TB-250 Torch Booster pressure is 45 psi.

Many jewelers’ torches work best at 3-7 psi, depending on torch manufacturer and tip size, and our regulator lets you set pressure exactly right for your torch.

OSHA and local fire codes require a flashback arrestor on torches mixing natural gas and oxygen. Our regulator mount combination flashback arrestor check valves fit right on the regulator to protect your gas meter from the dangers of a torch flashback.

G-TEC Distributors sell regulators and flashback arrestor equipment from different manufacturers. G-TEC takes no responsibility for performance or suitability of these products.

Our regulators screw right onto the front of the Torch Booster and make it easy to set torch pressure between 1-15 psi; standard TB-500 Torch Booster pressure is 45 psi.

Many jewelers’ torches work best at 3-7 psi, depending on torch manufacturer and tip size, and our regulator lets you set pressure exactly right for your torch.

OSHA and local fire codes require a flashback arrestor on torches mixing natural gas and oxygen. Our regulator mount combination flashback arrestor check valves fit right on the regulator to protect your gas meter from the dangers of a torch flashback.

G-TEC Distributors sell regulators and flashback arrestor equipment from different manufacturers. G-TEC takes no responsibility for performance or suitability of these products.